TENS UNITS

• Single Mode
• 3 Mode 
• 3 Mode with Timer 
• SD TENS 
• LCD TENS
• Micro Current 
• Electrodes

EMS UNITS

• Portable EMS

• Portable EMS w/AC

• 4 Channel EMS

• LCD EMS

• Interferential Stimulator

• Galvanic Stimulator

• Accessories

Phone (800) 981-7345

  Fax (585) 486-6067

• Home

• Contact Us

LCD TENS

Mode Selector Control:

The Mode selector button is under the lid cover.  It offers the mode status from five types of function modes, which are Burst, Normal, MRW (Modulated Rate and Width), SD (Strength Duration) and Bi-Pulse.

"v" increase control button (using a triangle-button) - This button will carry on the increase character to increase the pulse width from 50-260us, and to increase the pulse rate from 2 to 150Hz, and to increase the timer from 5 to 90 min.

"^"decrease control button (using an inverted triangle-button) - This button will carry on the decrease character to decrease the pulse width from 260 - 50us, and to decrease the pulse rate from 150 to 2HZ, and to decrease the timer from 90 to 5 min.

"MODE" button (using a round-button on the middle of the control panel) - this button will carry the character to select for a Stimulation-Mode.

"SET" button (using a round-button on the middle of the control panel) - This button will carry the character to set the width/rate/mode and timer.  After selecting the model/width/rate and timer, the user push the 'SET' button then the output will be changed immediately.

"LCD Screen" - This LCD will be utilized to display stimulating mode/pulse width/pulse rate and to display timer.  The channel output will be indicated on the top of the LCD screen.  The distinction of the modes will be showed on the left of the LCD panel.  The pulse rate and width will be showed on the middle-right of the screen.  The timer and clock symbol is showed on the bottom of the screen, the symbol will be twinkled until the final 5 min.

Technical Specifications

Channel:  dual, isolated between channels

Output Waveform:  asymmetric biphasic square pulse

Pulse Width:  variable, 50-260 us

Pulse Frequency:  variable 2-150 Hz

Adjustable Intensity Levels:  0 to 40 Volts (at load = 500 ohm)

Six Massage Modes:  burst, normal, MRW, SD, bi-pulse

Timer:  5-90 minutes auto-shutoff

Stimulation Modes

Burst - provides a "burst" of seven pulses.  Two bursts are delivered per second.

Normal - produces a continuous train of impulses

Modulated rate & width - pulse rate & width are varied to produce a massage-like sensation. 

  This mode offers a variety of different electrical stimulation that prevents nerve accommodation,  

  so that less intensity is required for long and effective treatment.

Strength Duration - alternating modulated intensity & pulse width, so the intensity is always increasing

  while the pulse width is decreasing and vice-versa.

Bi-Pulse - delivers 100 pulses per second to channel one while delivering four pulses per second

  to channel two.  Stimulation is on for one second and off for one second.